The correct way of laying tiles
1.Overlapping type (applicable to roofs with length≦15M)
2.Staggered type (applicable to roofs with length ≧15M)
Correct use of special nails
1.The special nail must be hit in the middle of the tile bone to have a waterproof effect.
2.The fixed interval of special nails is 50cm~100cm (preferably 4 pieces/㎡).
3.The special nails must be driven from the lower end of the tile toward the roof to have a beautiful, sealed and neat effect.
Install the sealing strip ridge tile cover
1.Separate the sealing strip in half, and place ridge tiles on the roof according to the tile type and fix them with special nails.
2.The joints of the side tiles are sealed with cement and then directly covered with ridge tiles, and the bottom of the ridge tiles is finished with a small tile stop.
3.The lower end of the tile, namely the eaves, is directly installed with the eaves cover and fixed with screws.
4.At the ridge tile junction, the contrast interface is trimmed with scissors and overlapped and sealed with glass glue.
Waterproof treatment of the protruding part
First, make a V-shaped material. Different materials and specifications can be selected, depending on the actual situation. After installing the water connection at the bottom, lay the color steel tiles on the top.
Connection installation on inclined surface
Refers to the construction where the two roof tiles are cut according to the angle and length, and the bottom is installed with water receiving treatment. First, install the water receiving material (ie gutter) under the tiles, and then use waterproof adhesive or cement for finishing.